Companies have continually utilized transformers for years. Since transformers have a life expectancy of 30 to 50 years, company rarely have to think about what to do when one goes bad. When transformers do stop working, it may be a challenging task to figure out what to do with the old one. Companies may even google, “who is the best company to recycle scrap transformers?”
In fact, a good place to start your research may be the ISRI website. The Institute of Scrap Recycling, Inc. is the voice of the recycling industry promoting safe, economically sustainable, and environmentally responsible recycling. They do this through networking, advocacy, and education. Moreover, they offer a searchable directory to help companies find the best recycling center closest to them.
When Do You Replace Transformers?
Before you research the best company to recycle scrap transformers, you need to determine if you even need a new transformer. In fact, there are a few ways to check to see if a transformer has gone bad:
- Perform a visual inspection. Common things you will see if a transformer has gone bad is bulges or burn marks. If you see this, then you do not need to test it, it needs to be replaced!
- Check the schematic circuit. When you look at a schematic, you can see how all the parts of the circuit are connected. You can check to make sure everything is connected.
- Find the input and output. You can easily tell if a transformer has gone bad if the output is not the same as the input.
- Check the voltage. You can check the voltage by checking the top center tap. If there is power going to the unit, check for a bad connection from the power connection block to the unit itself.
- Inspect the meter. If your meter does not show any voltage, then the problem likely lies with the unit itself and will need to be replaced.
- Evaluate the power. A bad transformer will have weak or no power. A simple way to check the power is to turn the unit off and on again.
- No voltage. If there is no power, there may be no voltage at all. You can quickly determine if voltage is the issue, by checking the voltage points. If there is no voltage or weak voltage, the problem may have some root causes. One could be the control board.
What Determines the Best Company to Recycle Scrap Transformers?
The best company to recycle scrap transformers will be a certified recycling center. Companies should work with a certified recycling center, like Interco, to guarantee proper recycling practices are in place. This will guarantee that the material will not end up in landfills, but rather will be reused. Certified recycling centers also have a number of benefits:
- Manufacturers and companies know exactly where their material is going. (Detailed documentation)
- Employ the best management practices are in place
- Evolving standards to continually improve the recycling process.
- Annual audits
In fact, all these points make the recycling buying and selling process as easy as possible. Therefore, a company should work with a certified recycling center, like Interco.
Interco is a global recycling company providing metals, computers and electronics recycling services to industrial, dealer, and government organizations throughout the western hemisphere. The facility has a 145,000 sqft. processing plant committed to the processing of computers, electronics, and batteries with the remainder of the indoor facility used for the processing of nonferrous industrial metals.
The facility has five buildings — approximately 400,000 square feet total — on more than 35 acres. The company facility has more than 20 inbound and outbound docks for receiving and shipping nonferrous scrap material as well as a railroad rail spur to load rail cars.
Interco, as an ISO 9001 Quality Management System certified company, continues an international-accepted uniform quality system, supplies the highest levels of customer service, and manages its material in the highest regard.
As an OHSAS 18001 Occupational Health & Safety Assessment Series Management System certified company, the company identifies and controls potential health and safety risks throughout the company and the tangential supply chain. The OHSAS 18001 standard is internationally recognized as the highest standard of health and safety management in existence.
Overall, companies will eventually need to get rid of their old transformers. In fact, the most ideal option is to recycle them with the best company to recycle scrap transformers, Interco. Interco will work with you to satisfy any of your scrap nonferrous metals and eScrap recycling needs. To learn more, click here.