Scrap Brass Shells Recycling Company

Scrap brass shells are increasing for companies. This is because manufacturers are producing a large amount of them. These brass shells contain valuable materials, like zinc, copper, and brass. They produce the brass shells using brass, aluminum, or steel. Sometimes they are made using chrome, nickel, silver, or even gold. In fact, this makes recycling the most profitable way to get rid of old ammo. After you have gathered all your brass shells, it is important to consider working with a scrap brass shells recycling company.

You can scrap all kinds of brass, but if it is clean, then it will have a higher value. In fact, the brass casing is fully recyclable. Recycling brass shells can earn a business extra money, regardless if it is a firing range, gun store, ammo manufacturer, or government entity.

What Not To Do With Your Old Ammo

There are a few things you should not do with your old ammo.

• You should not bury it. You can use the gunpowder for fertilizer, but the rest of the cartridge is not good for the environment. Burying ammo creates the potential of it leaking into the local water supply, which could cause harm to the human nervous system.
• You should not throw it away in the trash. This is not safe. When the compactor in a garage truck runs, the ammo could fire and cause harm.
• Do not soak the bullet in water or oil. This does not guarantee that this will ruin the gun powder and it will not fire. It could still ignite.

The safest thing for a company to do is to work with a scrap brass shells recycling company, like Interco. This guarantees that the material will be reused, instead of ending up in a landfill. Interco guarantees the reuse of 90 percent of the material.

About Interco

Interco is a global recycling company providing metals, computers and electronics recycling services to industrial, dealer, and government organizations throughout the western hemisphere. The facility has a 145,000 sqft. processing plant committed to the processing of computers, electronics, and batteries with the remainder of the indoor facility used for the processing of nonferrous industrial metals.

The facility has five buildings — approximately 400,000 square feet total — on more than 35 acres. The company facility has more than 20 inbound and outbound docks for receiving and shipping nonferrous scrap material as well as a railroad rail spur to load rail cars.

The company is within proximity to four major interstates (I-44, I-55, I-64, and I-70) while centrally located just across the Mississippi River from St. Louis, Missouri in Madison, Illinois. The company offers a convenient delivery location as the facility is near four major interstates (I-44, I-55, I-64, and I-70) that intersect all of the Midwest and Central USA.

The Recycling Process

The process of recycling brass shells is easy with Interco. These are the steps to recycling brass shells:

1. They sort the shells by material. Shell alloys are usually made from brass, aluminum or steel.
2. After they sort the material, they remove the shell.
3. They pop the shells in a high-temperature kiln. This forces any live rounds to explode.
4. A quality control supervisor verifies the shells, after they are placed in a special bin to cool.
5. Next, the shells are cleaned. Cleaners rinse the shells to remove as much lead and dirt as possible.
6. Inspectors run clean-and-popped shells through a shaker table. They verify that live rounds and they remove the other unwanted materials.
7. Next, a hammer mill or shredder takes the shells and deforms them into smaller pieces. Then an aggregator machine takes these pieces and loads them for transportation.
8. Finally, they take the shells to a brass mill. Then they mix, melt, and combine the shelled with metallic elements to achieve the specific blend. Then, they form the shells into rod or ingot.

Interco is a Scrap Brass Shells Recycling Company

Overall, brass shell scrap piles are building up for companies. They will need to work with a scrap brass shells recycling company to ensure the proper disposal of the ammo. Interco will work with you to satisfy any of your ammo recycling needs. In fact, Interco continues to lead the way in innovative industrial recycling solutions. To learn more about the services offered, click here.

Who Recycles Scrap Brass Shells Near Me?

Manufacturers are producing a large number of brass shells consistently. This means that scrap piles are building up for companies. Companies have a few options when it comes to dealing with old shells. So, companies that have a large number of brass shells may ask, “who recycles scrap brass shells near me?”

Companies should recycle their brass shells for a few reasons. Companies that decide to recycle their brass shells are doing their part to reduce landfills, waste, overall pollution, and the use of raw materials. If these brass shells end up in landfills, they could potentially leak into our drinking water. This would negatively affect the environment and the people who live in the surrounding area.

Some manufacturers and companies believe that these shells are not recyclable, but that is not the case. The material is totally recyclable. The casings of these old brass shells can actually be used multiple times. Companies also do not realize the potential value of these scrap brass shells. Copper, zinc, and brass are all inside brass shells. Through the recycling process, they extract these metals and introduce them back into the manufacturing process. This could potentially bring a business extra cash.

The Recycling Process: Brass Shells

These shells are usually made from brass, aluminum, or steel. But sometimes they are made using chrome, nickel, silver, or even gold. You cannot recycle any live cartridges for safety reasons.

First, you must know the parts of the material:

• The Projectile
• Packaging
• Black powder
• The groundwork

Then, the recycler collects the material and sorts them. After sorting the shells, the recycling process continues:

1. Removing the shell.
2. They pop the shells in a high-temperature kiln.
3. A quality control supervisor verifies the shells are ready to proceed.
4. They clean the shells to remove as much lead and dirt as possible.
5. Inspectors then run clean-and-popped shells through a shaker table.
6. Next, a hammer mill or shredder takes the shells and deforms them into smaller pieces. Aggregator machines take these pieces and load them for transportation.
7. Finally, they take the shells to a brass mill. They then melt, combine, and mix the brass shells with metallic elements to achieve a specific blend.

Finally, they form the brass shells into an ingot or rod. Moreover, Interco buys scrap brass shells all over the United States.

How Do I Find A Recycling Center Near Me?

As companies begin to face the issue of how to manage old ammunition, scrap piles will begin to increase. Companies will need an answer to the question, “who recycles scrap brass shells near me?”

A good place to start your research is the ISRI website. The Institute of Scrap Metal Recycling Industries, Inc. is the voice of the recycling industry promoting safe, economically sustainable, and environmentally responsible recycling. They do this through networking, advocacy, and education. They offer a searchable directory to make it easy for people to acquire recycler’s contact information.

Interco has been a member since 1996. The question of where to take your brass shells may seem impossible, but Interco buys brass shells and other scrap metal all over the United States.

About Interco

Interco is a global recycling company providing metals, computers, and electronics recycling services to the industrial, dealer, and government organizations throughout the western hemisphere. The company processes more than 10,000 tons of nonferrous scrap every month.

The team at Interco offers creative solutions, competitive pricing, and quality service throughout the supply chain. The company has been an industry leader providing metals, computers, and electronics recycling services with a focused track record of innovation and integrity since 1996.

Interco has grown to prominence as one of the most reputable recyclers of nonferrous scrap in the United States. The company is experiencing significant market position growth due to several factors that suggest steady acceleration for years to come.

The facility has five buildings — approximately 400,000 square feet total — on more than 35 acres. The company facility has more than 20 inbound and outbound docks for receiving and shipping nonferrous scrap material as well as a railroad rail spur to load rail cars.

Interco Recycles Scrap Brass Shells

Overall, scrap piles are increasing for companies. Companies will need to make a decision on how to handle the influx of materials. Companies will need an answer to the question, “who recycles scrap brass shells near me?” The answer is Interco. Interco will work with you to fulfill any of your ammunition recycling needs. To learn more, click here.

The Importance of a Certified Scrap Brass Shells Recycler

With a large amount of scrap brass shells being produced, scrap piles will ultimately build up. A certified scrap brass shells recycler benefits greatly from the recyclable materials that are found in these brass shells.

Many recyclers and manufacturers believe that brass shells are not recyclable, but that is not the case. The material is completely recyclable. Many associations face the issue of how to manage their old ammo and this leads to unwanted piles of scrap.

A good place to start your research would be the ISRI website. This website contains a searchable directory, so it is extremely easy to find a local recycling center near you. This directory contains links to emails and company websites. The directory is searchable by:

• Individual
• Company
• Commodity handled

The Institute of Scrap Metal Recycling Industries, Inc. is the voice of the recycling industry promoting safe, economically sustainable, and environmentally responsible recycling. They do this through networking, advocacy, and education.

Interco has been a member since 1996. Working with a certified scrap brass shells recycler, like Interco, would make dealing with these scrap piles easier.

Why work with a Certified Scrap Brass Shells Recycler?

There are a few actions you should not take with your old ammo.

1. You should not bury it. The gunpowder is sometimes found for fertilizer, but the rest of the cartridge is not good for the environment. Burying ammo creates the potential of it leaking into the local water supply, which could cause harm to the human nervous system.
2. You should not throw it away in the trash. This is not safe. When the compactor in a garage truck runs, the ammo could fire and cause harm.
3. Do not soak the bullet in water or oil. It is not guaranteed that this will ruin the gun powder and it will not fire. It could still ignite.

The safest thing for a company that has a large number of brass shells is to work with a certified scrap brass shells recycler. This guarantees that proper recycling practices are in place. Interco also guarantees that 90 percent of the material will be sent back into the manufacturing process.

Companies that decide to work with a recycler and recycle brass shells are doing their part to help reduce landfills, waste, overall pollution, and the use of raw materials.

Businesses that decide to work with a recycler could earn their business extra cash. Brass shells contain valuable metals, like copper, zinc, and brass. The recycling process extracts these valuable metals. This makes recycling the most profitable way to discard used ammo.

About Interco

Interco is a global recycling company providing metals, computers, and electronics recycling services to the industrial, dealer, and government organizations throughout the western hemisphere. The facility has a 145,000 sqft. processing plant committed to the processing of computers, electronics, and batteries with the remainder of the indoor facility used for the processing of nonferrous industrial metals.

The facility comprises five buildings — approximately 400,000 square feet total — on more than 35 acres. In fact, the company facility has more than 20 inbound and outbound docks for receiving and shipping nonferrous scrap material as well as a railroad rail spur to load rail cars.

The company is within proximity to four major interstates (I-44, I-55, I-64, and I-70) while centrally located just across the Mississippi River from St. Louis, Missouri in Madison, Illinois. The company offers a convenient delivery location as the facility is near four major interstates (I-44, I-55, I-64, and I-70) that intersect all of the Midwest and Central USA.

Established in 1996, Interco has grown to prominence as one of the most reputable recyclers of nonferrous scrap in the United States. Furthermore, the company is experiencing significant market position growth due to a number of factors that suggest steady acceleration for years to come.

Interco is a Certified Scrap Brass Shells Recycler

Brass shell scrap piles are increasing for companies. Companies need to make a decision on how to manage their old brass shells. The best way to handle the influx of material is to work with a certified scrap brass shells recycler. Therefore, this guarantees proper recycling practices are in place. Interco will work with you to satisfy any of your ammunition recycling needs. The team offers delivery, pickup, full truckload, and LTL services. Click here to learn more.

Why Should I Recycle My Brass Shells with a Scrap Brass Shells Salvage Company?

Manufacturers are producing a large number of brass shells. This means that scrap piles are building up for companies. Companies will need to make a decision on how to handle it. The best option is working with a scrap brass shells salvage company, like Interco.

Companies should recycle their brass shells for a few reasons. Companies that decide to recycle their brass shells are doing their part to reduce landfills, waste, overall pollution, and the use of raw materials. If brass shells end up in landfills, they could potentially leak into our drinking water and harm the human nervous system.

Some manufacturers and companies believe that brass shells cannot be recycled, but that is not the case. The material is totally recyclable. The casing can actually be used multiple times. People also do not realize the potential value of these scrap brass shells. Brass shells contain valuable metals like copper, zinc, and brass. Through a recycling process, they extract these metals and re-enter them into the manufacturing process. So, recycling brass shells could earn your business some extra cash.

Where to find a Scrap Brass Shells Salvage Company?

As companies begin to face the issue of how to manage old ammo, scrap piles begin to increase. Companies will need to find a scrap brass shells salvage company.

A good place to start your research is the ISRI website. The Institute of Scrap Metal Recycling Industries, Inc. is the voice of the recycling industry promoting safe, economically sustainable, and environmentally responsible recycling. They do this through networking, advocacy, and education. They offer a searchable directory to make it easy for people to acquire recycler’s contact information.

Interco has been a member since 1996. The question of where to take your brass shells may seem impossible, but Interco buys brass shells and other scrap metal all over the United States.

About Interco, A Scrap Brass Shells Salvage Company

Interco processes more than 10,000 tons of nonferrous scrap every month. The company offers creative solutions, competitive pricing, and quality service throughout the supply chain. The company has been an industry leader providing metals, computers, and electronics recycling services with a focused track record of innovation and integrity since 1996.

Established in 1996, Interco has grown to prominence as one of the most reputable recyclers of nonferrous scrap in the United States. The company is experiencing significant market position growth due to several factors that suggest steady acceleration for years to come.

The facility has five buildings — approximately 400,000 square feet total — on more than 35 acres. The company facility has more than 20 inbound and outbound docks for receiving and shipping nonferrous scrap material as well as a railroad rail spur to load rail cars.

Interco has grown to be one of the most reputable recyclers of nonferrous scrap in the nation.

The Recycling Process: Brass Shells

Interco reuses spent brass shells, indoor/outdoor range and, demilled military ordnance, tactical munition, and artillery shells. These shells are usually made from brass, aluminum, or steel. But sometimes they are made using chrome, nickel, silver, or even gold.

First, you must know the parts of the material:

• The Projectile
• Packaging
• Black powder
• The groundwork

Then, the recycler collects the material and sorts them. After sorting the shells, the recycling process continues:

1. Removing the shell.
2. They pop the shells in a high-temperature kiln.
3. A quality control supervisor verifies the shells are ready to proceed.
4. They clean the shells to remove as much lead and dirt as possible.
5. Inspectors then run clean-and-popped shells through a shaker table.
6. Next, a hammer mill or shredder takes the shells and deforms them into smaller pieces. Aggregator machines take these pieces and load them for transportation.
7. Finally, they take the shells to a brass mill. They then melt, combine, and mix the brass shells with metallic elements to achieve a specific blend.

Finally, they form the brass shells into an ingot or rod. Moreover, Interco buys scrap brass shells all over the United States.

Recycle Your Brass Shells with Interco

Overall, brass shells scrap piles are increasing for companies. Companies will need to make a decision on how to deal with the influx of material. The best option is working with a scrap brass shells salvage company, like Interco. Interco will work with you to fulfill any of your ammunition recycling needs. With a staff of 100 full-time employees, the company receives, processes, upgrades, repackages, and ships approximately 15,000 tons of material monthly. The team offers delivery, pickup, full truckload, and LTL services. To learn more, click here.

Where to Sell Scrap Brass Shells?

Scrap Brass shells are a very common type of recycled ammunition. People use brass shells because of the shell’s durability, corrosion resistance, and ease of reloading. Since a lot of people use them, it is important to collect and recycle them. So, someone who has a lot of brass shells may need to research where to sell scrap brass shells.

Manufacturers can sell scrap brass shells to Interco for recycling for the best prices brass shells. The parts of the ammo include:

• Casing
• Primer
• Black Powder
• Bullet

Why You Should Recycle Scrap Brass Shells

Recycling scrap brass shells help keep valuable materials out of landfills. Brass shells have low degrees of aluminum and manganese bronze. This means that 90 percent of the metal can be reused. Since manufacturers produce large amounts of scrap, recycling these shells is important.

Companies should sell scrap brass shells to a recycling center to get the best prices brass shells. Recycling centers, like Interco, buy used ammo to recycle. Companies that recycle these shells are doing their part in making sure these materials do not end up in landfills. These companies are doing their part to reduce waste, landfills, and overall pollution.

The Recycling Process

Ammunition cannot enter the recycling process as a live round. They may explode, which causes safety concerns. For this reason, the lead in live ammo contaminates the shell’s brass. So, recyclers find it difficult to separate lead from brass.

The process of recycling brass shells is easy with Interco. These are the steps to recycling brass shells:

1. Shells must be sorted by material. Shell alloys are usually made from brass, aluminum, or steel. Occasionally they are plated with chrome, nickel, silver or even gold.
2. After being sorted, the shell must be removed.
3. Shells “pop” in a high-temperature kiln after being sorted. This forces any live rounds to explode.
4. A quality control supervisor verifies the shells after they are placed in a special bin to cool.
5. Next, the shells enter a cleaning cycle. Cleaners rinse the shells to remove as much lead and dirt as possible.
6. Inspectors run clean-and-popped shells through a shaker table. They verify that live rounds and other unwanted materials are removed.
7. Next, a hammer mill or shredder takes the shells and deforms them into smaller pieces. Then an aggregator machine takes these pieces and loads them for transportation.
8. Finally, the shells are taken to a brass mill. Here they are melted and combined. Mixed with metallic elements to achieve a specific blend. Then, shells are formed into rod or ingot.

Interco buys scrap brass shells across the United States. Due to transportation costs, recycling brass shells that are far away can be difficult. Regardless, Interco will work with you to overcome any travel issues.

What Not To Do With Ammo

You should not bury ammo. The gunpowder can be used for fertilizer, but the rest of the cartridge is not good for the environment. Burying ammo could cause the lead to leak into the water supply.

You should not throw ammo away in the trash. This is not safe. The ammo could fire when the compactor in trucks run. Also, do not soak the bullet in water or oil. There is no guarantee that this will ruin the gunpowder. It could still ignite.

The safest thing to do is to sell scrap brass shells to a recycling center.

About Interco

Interco is a global recycling company providing metals, computers, and electronics recycling services to the industrial, dealer, and government organizations throughout the western hemisphere. The facility has a 145,000 sqft. processing plant committed to the processing of computers, electronics, and batteries with the remainder of the indoor facility used for the processing of nonferrous industrial metals.

The facility is comprised of five buildings — approximately 400,000 square feet total — on more than 35 acres. The company facility has more than 20 inbound and outbound docks for receiving and shipping nonferrous scrap material as well as a railroad rail spur to load rail cars.

The company is within proximity to four major interstates (I-44, I-55, I-64, and I-70) while centrally located just across the Mississippi River from St. Louis, Missouri in Madison, Illinois. The company offers a convenient delivery location as the facility is near four major interstates (I-44, I-55, I-64, and I-70) that intersect all of the Midwest and Central USA.

Sell Your Brass Shells to Interco

Overall, brass shells are piling up for companies and they need to be recycled. Companies that sell scrap brass shells to recycling centers are doing their part to decrease waste, landfills, and overall pollution. Recycling centers, like Interco, buy scrap brass shells for recycling. In fact, Interco continues to lead the way in innovative industrial recycling solutions. To learn more about where to sell scrap brass shells and the best prices brass shells, click here.

What is the Scrap Value for Brass Shells?

It is common to see scrap brass shells casings on the ground, but many people are unaware of the potential recycling value of brass shells. The life of each brass casing evolves from a brass coil that is made from a combination of zinc and copper. The process to recycle brass shells discovers metal shell housings with low degrees of aluminum and manganese bronze.

The brass shell casing is recyclable and can be reused several times. When recycling scrap brass shells casings, recycling centers like Interco ensure the reuse of 90% of the metal.

Manufacturers produce large amounts of scrap brass shells. While where to recycle scrap brass cartridges can seem challenging, Interco buys brass shells and other scrap metal to perform a reuse process.

The Scrap Value for Brass Shells

Whether a firing range, gun store, ammunition manufacturer, or government entity, the process to recycle and reuse brass shells, casings, and range lead can earn a business extra money on scrap metal.

Each cartridge casing begins its life as a brass “coil” formed when copper and zinc, along with a few trace elements, combine to form brass. Scrap brass shells are the most popular type of recycled ammunition. Their popularity derives from the shell casings’ durability, corrosion resistance, and ease of reloading.

All types of brass can be scrapped, but those that are clean have a higher value. The brass casing is recyclable, so after a round has been fired at the range, this portion can enter the recycling process.

Generally, recycled ammunition develops into new ammunition. In fact, brass casings can be reused a few times.

Several recyclers and manufacturers assume that ammunition cannot be recycled, however, the material is fully recyclable. Consequently, the issue is finding an association with the resources and equipment to adequately recycle brass shells.

Interco recycles spent brass shells and cartridges, indoor/outdoor range lead, demilled military ordnance, tactical munitions, and artillery shells.

Numerous associations – including the military, gun stores, and ammunition manufacturers – face the issue of how to manage undesirable or lapsed ammunition.

Recycle Brass Shells

Ammunition must be inert to enter the recycling process. Any live cartridges cannot go through the recycling process for safety reasons. The recycling process begins once recyclers sort the material. Brass shells are important to collect and recycle, though easy to do. The process to recycle brass shells starts by knowing the parts of the material:

• The projectile
• Packaging
• Black powder
• The groundwork

The Recycling Process

Shell alloys usually contain brass, aluminum, or steel. Occasionally, brass shells comprise of chrome, nickel, silver, or even gold. After sorting the brass shells, the recycling process then proceeds with the following:

1. Removing the shell.
2. Shells “pop” in a high-temperature kiln.
3. A quality control supervisor verifies the shells are ready to proceed.
4. The shells enter a cleaning process to remove as much lead and dirt as possible.
5. Inspectors then run clean-and-popped shells through a shaker table.
6. Next, a hammer mill or shredder takes the shells and deforms them into smaller pieces. Aggregator machines take these pieces and load them for transportation.
7. Finally, the shells are taken to a brass mill. Brass shells are then melted, combined, and mixed with metallic elements to achieve a specific blend.

To finish the recycling process, brass shells are then formed into rod or ingot. Consequently, Interco purchases scrap brass cartridges across the United States.

Established in 1996, Interco has grown to prominence as one of the most reputable recyclers of nonferrous scrap in the United States. The company is experiencing significant market position growth due to several factors that suggest steady acceleration for years to come. In addition, Interco buys components, whole units, peripherals, batteries and boards, and precious metal anywhere in North America for recycling.

Highest Value for Scrap Ammunition with Interco

Scrap brass shell casings are the most popular type of recycled ammunition. Their popularity derives from the shell casings’ durability, corrosion resistance, and ease of reloading. Interco will work with you to fulfill any of your ammunition recycling needs. Also, Interco purchases components, whole units, peripherals, batteries and boards, and precious metal anywhere in North America for recycling. The company continues to lead the way in terms of innovative industrial recycling solutions. The team at Interco offers delivery, pickup, full truckload, and LTL services. Click here to learn more about Interco’s services.

Reputable ISRI Brass Shells Recycler

Since manufacturers are producing a large amount of scrap brass shells, scrap piles are increasing for companies. This means companies will need to make a decision on how to handle it. Many manufacturers and companies are unaware of the potential value of recycling brass shells. Therefore, working with a reputable ISRI brass shells recycler, like Interco, can actually earn your business some extra cash.

Each cartridge casing begins its life as a brass coil formed when copper and zinc, along with a few trace elements, combine to form brass. The recycling process extracts these metals to reuse and re-enter the manufacturing process. So, recycling is the most profitable way to discard brass shells.

Where to find a Reputable ISRI Brass Shells Recycler

The ISRI stands for the Institute of Scrap Recycling Industries, Inc. ISRI is the nonprofit trade association that is the “Voice of the Recycling Industry.” The Institute of Scrap Recycling Industries, Inc. is the voice of the recycling industry promoting safe, economically sustainable, and environmentally responsible through networking, advocacy, and education.

ISRI represents more than 1,100 private and public for-profit companies that process, broker, and industrially consume all scrap commodities. They provide a real-time searchable membership directory to facilitate member interaction and to provide the public with recycler contact information. The directory is searchable by individual, company, or commodity handled, with links to emails and company websites.

Interco has been a member of the ISRI since 1996.

The Recycling Process

Scrap brass shells are the most popular type of recycled ammo. They are popular because of the shell casings’ durability, corrosion resistance, and ease of reloading. So, when scrap brass shells start to pile up, it is important to collect and recycle with a reputable ISRI brass shells recycler.

First, you need to know the parts of the material:

• The projectile
• Packaging
• Black powder
• The groundwork

Shell alloys are usually containing brass, aluminum, or steel. Sometimes, brass shells are plated with chrome, nickel, silver, or even gold. When recycling ammo, it must be inert. You cannot recycle any live cartridges for safety reasons. After sorting the brass shells, the recycling process continues:

1. Removing the shell.
2. They pop the shells in a high-temperature kiln.
3. A quality control supervisor verifies the shells are ready to process.
4. They clean the shells to remove as much dirt and lead as possible.
5. Inspectors then run clean-and-popped shells through a shaker table.
6. Next, a hammer mill or shredder takes the shells and deforms them into smaller pieces. Aggregator machines take these pieces and load them for transportation.
7. Finally, they take the shells to a brass mill. They melt, combine, and mix the brass shells with metallic elements to achieve a specific blend.

To finish the recycling process, they form the brass shells into rod or ingot.

Working with a reputable ISRI brass shells recycler, guarantees proper recycling practices are in place. It also makes recycling brass shells extremely easy. Interco provides firing ranges, gun stores, ammo manufacturers, or government entities reliable and competitive pricing.

About Interco

Interco is a global recycling company providing metals, computers, and electronics recycling services to the industrial, dealer, and government organizations throughout the western hemisphere. The facility has a 145,000 sqft. processing plant committed to the processing of computers, electronics, and batteries with the remainder of the indoor facility used for the processing of nonferrous industrial metals.

The facility is comprised of five buildings — approximately 400,000 square feet total — on more than 35 acres. The company facility has more than 20 inbound and outbound docks for receiving and shipping nonferrous scrap material as well as a railroad rail spur to load rail cars.

The company is within proximity to four major interstates (I-44, I-55, I-64, and I-70) while centrally located just across the Mississippi River from St. Louis, Missouri in Madison, Illinois. The company offers a convenient delivery location as the facility is near four major interstates (I-44, I-55, I-64, and I-70) that intersect all of the Midwest and Central USA.

Interco is a Reputable ISRI Brass Shells Recycler

Scrap piles of brass shells are piling up for companies. Companies will need to make a decision on how to handle it. Working with a reputable ISRI brass shells recycler, like Interco, makes it easy. Companies that decide to recycle their brass shells are doing their part to reduce landfills, waste, overall pollution, and the use of raw materials. Interco will work with you to satisfy any of your ammunition recycling needs. In fact, Interco continues to lead the way in innovative industrial recycling solutions. To learn more about the services offered, click here.

Why Should my Business Recycle Scrap Brass Shells?

In a variety of industries–and most likely yours–businesses toss valuables in the trash. Most people are unaware of the potential recycling value of brass shells. A pile of scrap brass shells in collaboration with the best company to recycle scrap brass shells can earn a business extra money.

The life of each brass casing evolves from a brass coil that is made from a combination of zinc and copper. Eventually, as manufacturers produce copious amounts of scrap brass shells, businesses must consider a proper disposal method.

The brass shells casing is recyclable and reused numerous times. The question of where to recycle scrap brass cartridges can seem challenging, but Interco buys brass shells and other scrap metal. Consequently, the question of why a business should recycle scrap brass shells follows.

Several recyclers and manufacturers assume that ammunition cannot be recycled, however, the material is fully recyclable. Whether a firing range, gun store, ammunition manufacturer, or government entity, industries look to dispose of their scrap pile with the best company to recycle scrap brass shells.

Why Your Business Should Recycle Scrap Brass Shells

Various associations – including the military, gun stores, and ammunition manufacturers – face the issue of how to manage undesirable or lapsed ammunition leading to unwanted piles of scrap.

The recycling process starts once recyclers sort the material collected. The process to recycle brass shells starts by knowing the parts of the material:

• The projectile
• Packaging
• Black powder
• The groundwork

Whether a firing range, gun store, ammunition manufacturer, or government entity, the process to recycle and reuse brass shells, casings, and range lead can earn a business spare cash on scrap metal.

Brass shell casings contain precious metals that are copper, zinc, and brass. The procedure of recycling discovers and extracts these valuable materials. Thus, these metals re-enter the manufacturing process, which benefits the brass industry.

Once recycling scrap brass shells casings, recycling centers like Interco ensure the reuse of 90% of the metal. Therefore, the process creates new ammunition without the use of raw materials.

The life of each brass casing evolves from a brass coil that is made from a combination of zinc and copper. The process to recycle brass shells discovers metal shell housings with low degrees of aluminum and manganese bronze.

Each cartridge casing begins its life as a brass coil formed when copper and zinc, along with a few trace elements, combine to form brass. Scrap brass shells are the most popular type of recycled ammunition.

The Brass Shells Recycling Process

Shell alloys are typically made from brass, aluminum, or steel. Occasionally, chrome, nickel, silver, or even gold plate brass shells. Interco recycles spent brass shells and cartridges, indoor/outdoor range lead, demilled military ordnance, tactical munitions, and artillery shells.

After sorting the brass shells, the recycling process then proceeds with the following:

1. Removing the shell.
2. Shells pop in a high-temperature kiln.
3. A quality control supervisor verifies the shells are ready to proceed.
4. The shells enter a cleaning process to remove as much lead and dirt as possible.
5. Inspectors then run clean-and-popped shells through a shaker table.
6. Next, a hammer mill or shredder takes the shells and deforms them into smaller pieces. Aggregator machines take these pieces and load them for transportation.
7. Finally, the shells are taken to a brass mill. Brass shells are then melted, combined, and mixed with metallic elements to achieve a specific blend.

To complete the recycling process, brass shells form into rods or ingots. Consequently, Interco buys scrap brass cartridges across the United States.

Interco processes more than 10,000 tons (20-million pounds) of nonferrous scrap each month. Interco offers creative solutions, competitive pricing, and quality service throughout the supply chain. The company has been an industry leader providing metals, computers, and electronics recycling services with a focused track record of innovation and integrity since 1996.

Your Business Should Recycle Scrap Brass Shells with Interco

Scrap brass shells’ popularity derives from the shell casings’ durability, corrosion resistance, and ease of reloading. Interco will work with you to fulfill any of your ammunition recycling needs. In fact, Interco is the best company to recycle scrap brass shells with the resources and equipment to effectively recycle scrap ammunition. Established in 1996, Interco has grown to prominence as one of the most reputable recyclers of nonferrous scrap in the United States. The team at Interco offers delivery, pickup, full truckload, and LTL services. Learn more about Interco’s services here.

Three Things to Look for in a Brass Shells Recycler

If your business has a large quantity of scrap brass shells, the process to recycle and reuse brass shells, casings, and range lead can result in extra money. Several associations – including the military, gun stores, and ammunition manufacturers – face the issue of how to manage undesirable or lapsed ammunition. If your business has a large quantity of scrap brass shells, earn the best prices scrap brass shells can offer.

Whether a firing range, gun store, ammunition manufacturer, or government entity, industries that work with brass know that all types of brass can be scrapped. Although, those that are clean have a higher value.

Interco recycles spent brass shells and cartridges, indoor/outdoor range lead, demilled military ordnance, tactical munitions, and artillery shells. Additionally, ammunition must be inert to be recycled. Any live cartridges cannot enter the recycling process for safety reasons. Often, businesses and companies with scrap metal search ‘best prices scrap brass shells’ once they have collected a surplus of the material. The brass casing is recyclable, so after a round has been fired at the range, this portion is recyclable.

Three Things to Look for in a Recycler

Numerous recyclers and manufacturers assume that ammunition cannot be recycled, however, the material is completely recyclable. Therefore, the issue is finding an association with the resources and equipment to adequately recycle brass shells.

The process to recycle scrap brass shells starts by understanding the parts of the material:

• The projectile
• Packaging
• Black powder
• The groundwork

Shell alloys are usually made from brass, aluminum, or steel. Occasionally, chrome, nickel, silver, or even gold plate brass shells. After arranging the brass shells, the recycling process then continues. Beyond the search, for the best prices for scrap brass shells, it is important to consider the facility’s recycling process. Established in 1996, Interco has grown to prominence as one of the most reputable recyclers of nonferrous scrap in the United States.

Recycling Method

After sorting the brass shells, the recycling process then proceeds with the following:

1. Removing the shell.
2. Shells pop in a high-temperature kiln.
3. A quality control supervisor verifies the shells are ready to proceed.
4. The shells enter a cleaning process in order to remove as much lead and dirt as possible.
5. Inspectors then run clean-and-popped shells through a shaker table.
6. Next, a hammer mill or shredder takes the shells and deforms them into smaller pieces. Aggregator machines take these pieces and load them for transportation.
7. Finally, the shells transfer to a brass mill. Brass shells are then melted, combined, and mixed with metallic elements to achieve a specific blend.

To finish the recycling process, brass shells are then formed into rod or ingot. Consequently, Interco purchases scrap brass cartridges across the United States.

Recycling Certifications

Most recycling companies apply for several certifications for their recycling company. When a recycling company applies for a national recycling certification, they are prompted to complete a professional training program that educates them on the recycling best practices.

Interco became only the second electronics refurbishing and recycling company in the world to achieve the coveted Responsible Recycling R2v3 Standard Certification. Sustainable Electronics Recycling International (SERI) manages the standard. The R2v3 Standard offers general principles and practices for IT equipment disposal vendors.

Recycling Violations

Finding a recycling company that has no violations is highly recommended. There are a couple of reasons why a recycling company would be given a recycling violation, which frequently comes with a substantial fine to discourage professional recyclers from breaking current recycling rules. Recycling violations can be something as straightforward as not correctly separating the recyclables into their appropriate container, or something as significant as not following OSHA’s safety guidelines.

Conclusion

Scrap brass shell casings are a highly popular type of recycled ammunition. Their popularity originates from the shell casings’ durability, corrosion resistance, and ease of reloading. Interco will work with you to fulfill any of your ammunition recycling needs. Numerous associations look online for the ‘best prices scrap brass shells.’ Four patent-pending material processing plants give Interco the capacity to process more than 10 million pounds of computers, electronics, batteries, solar panels, and alternative energy generation and storage equipment monthly. The team at Interco offers delivery, pickup, full truckload, and LTL services. Click here to learn more about Interco’s services.

Recycling Brass Shells: What to Know

Whether it is old, corroding ammunition, or expired rounds at the range, ammunition is a material that needs to be disposed of carefully and properly. In fact, recycling brass shells come easily as the material is fully recyclable.

The process of recycling brass shells casings begins with the collection of the material. Whether a firing range, gun store, ammunition manufacturer, or government entity, the process to recycle and reuse brass shells, casings, and range lead can earn a business extra money on scrap metal.

Brass shells have popularity that derives from the shell casings durability, corrosion resistance, and ease of reloading. In fact, manufacturers that produce large amounts of scrap brass shells can use this metal to produce more ammunition.

The brass shell casing is recyclable and can be reused several times. When recycling brass shells, recycling centers like Interco ensure the reuse of 90% of the metal.

What’s in Ammunition?

When recycling brass shells, it is best to get to know the components that make up a piece of ammunition, also known as a cartridge. A cartridge contains the following:

• Bullet
• Casing
• Gun powder
• Primer

The primer is found on the bottom of the casing, the gunpowder is inside the casing, and the bullet is seen peeking out of the casing. The bullet is typically made of lead, while the casing is generally made from brass.

The process of recycling brass shells discovers metal shell housings with low degrees of aluminum and manganese bronze. Therefore, brass shells contain valuable metals that are precious to recycling centers.

The Recycling Brass Shells Process

Shell alloys usually contain brass, aluminum, or steel. Occasionally, brass shells have plates with chrome, nickel, silver, or even gold. After sorting the brass shells, the recycling process then proceeds with the following:

1. Removing the shell.
2. Shells “pop” in a high-temperature kiln.
3. A quality control supervisor verifies the shells are ready to proceed.
4. The shells enter a cleaning process to remove as much lead and dirt as possible.
5. Inspectors then run clean-and-popped shells through a shaker table.
6. Next, a hammer mill or shredder takes the shells and deforms them into smaller pieces. Aggregator machines take these pieces and load them for transportation.
7. Finally, the shells go to a brass mill. Brass shells are then melted, combined, and mixed with metallic elements to achieve a specific blend.

To complete the recycling process, brass shells fill the form of a rod or ingot. Consequently, Interco purchases scrap brass cartridges across the United States.

Where to Take Scrap Brass Shells

Several types of brass can be scrapped, but those that are clean have a higher value. In fact, numerous recyclers and manufacturers guess that ammunition cannot be recycled, however, that is false. Consequently, despite being fully recyclable, the issue is finding a facility with the resources and equipment to adequately recycle brass shells.

A local gun range or recycling center offers scrappers a safe and lucrative way to dispose of brass shells. Additionally, there are a few suggestions of what not to do including: don’t bury ammunition as a way of disposal and don’t throw away ammunition in the trash.

Local Gun Range

Many local gun ranges accept corroded rounds or brass shells. A few ranges will collect dud rounds – cartridges that do not fire when the trigger is pulled – and dispose of them properly.

Recycling Center

There are multiple hazardous waste collection sites or recycling centers that may accept brass shells.

Interco recycles spent brass shells and cartridges, indoor/outdoor range lead, demilled military ordnance, tactical munitions, and artillery shells.

Established in 1996, Interco has grown to prominence as one of the most reputable recyclers of nonferrous scrap in the United States. The company is experiencing significant market position growth due to several factors that suggest steady acceleration for years to come. In addition, Interco buys components, whole units, peripherals, batteries and boards, and precious metal anywhere in North America for recycling.

Take Your Scrap Brass Shells to Interco for Recycling

Interco purchases scrap brass cartridges across the United States. Scrap brass shells are the most popular type of recycled ammunition. Consequently, most consumers are unaware that they can recycle brass shell casings. Interco provides recycling brass shells services to numerous associations – including the military, gun stores, and ammunition manufacturers – that face the issue of how to manage undesirable or lapsed ammunition. For more information about recycling brass shells, click here.

Scrap Brass Shells Processing Facility

Shell components are usually made from brass, aluminum, or steel. Occasionally, chrome, nickel, silver, or even gold plate brass shells. These valuable materials make recycling the most profitable way to dispose of scrap brass shells. Following collecting brass shells, it is important to consider a scrap brass shells processing facility.

All kinds of brass can be scrapped, but those that are clean have a higher value. The brass casing is fully recyclable. As scrap brass shells eventually pile up, Interco purchases brass shells and other scrap metal to perform a reuse process.

Each cartridge casing launches its life cycle as a brass coil formed when copper and zinc, along with a few trace elements, combine to form brass.

Whether a firing range, gun store, ammunition manufacturer, or government entity, the method to recycle and reuse brass shells, casings, and range lead can earn a business extra money on scrap metal.

How to Dispose of Expired Ammunition

Most local waste management facilities do not accept ammunition. In fact, ammunition must be inert to be recycled. Any live cartridges cannot be recycled for safety reasons.

Whether a landfill or other type of facility, it is probably not equipped to handle ammunition as a waste product. Although, Interco recycles spent brass shells and cartridges, indoor/outdoor range lead, demilled military ordnance, tactical munitions, and artillery shells.

The process to recycle scrap brass shells starts by understanding the parts of the material:

• The projectile
• Packaging
• Black powder
• The groundwork

Scrap brass shells are the most popular type of recycled ammunition. Their reputation stems from the shell casings’ durability, corrosion resistance, and ease of reloading.

Recycling Scrap Brass Shells: The Significance

Several recyclers and manufacturers think that ammunition cannot be recycled, however, the material is fully recyclable. Consequently, the issue is finding an association with the resources and equipment to adequately recycle brass shells.

Numerous associations – including the military, gun stores, and ammunition manufacturers – face the issue of how to manage undesirable or lapsed ammunition.

Often, businesses and companies with scrap metal search for the best scrap brass shells processing facility once they have collected a surplus of the material. As a result, recycled ammunition develops into new ammunition. As a result, brass casings are reusable several times.

The Brass Shells Recycling Method

Following sorting the brass shells, the recycling process then goes on with the following:

1. Removing the shell.
2. Shells pop in a high-temperature kiln.
3. A quality control supervisor verifies the shells are ready to proceed.
4. The shells then go through a cleaning process to remove as much lead and dirt as possible.
5. Inspectors then run clean-and-popped shells through a shaker table.
6. Next, a hammer mill or shredder takes the shells and deforms them into smaller pieces. Aggregator machines take these pieces and load them for transportation.
7. Finally, the shells transfer to a brass mill. Brass shells are then melted, combined, and mixed with metallic elements to achieve a specific blend.

To complete the recycling process, brass shells are then created into rod or ingot. Consequently, Interco purchases scrap brass cartridges across the United States.

Reputable since 1996, Interco has grown to prominence as one of the most trustworthy recyclers of nonferrous scrap in North America. The company is experiencing significant market position growth due to several factors that suggest steady acceleration for years to come. In addition, Interco buys components, whole units, peripherals, batteries and boards, and precious metal anywhere in the United States for recycling.

Interco is a Scrap Brass Shells Processing Facility

Scrap brass shell casings are one of the most popular types of recycled ammunition. Their popularity originates from the shell casings’ durability, corrosion resistance, and ease of reloading. Interco will work with you to fulfill any of your ammunition recycling needs. Numerous associations look online for a certified and reputable scrap brass shells processing facility. Four patent-pending material processing plants give Interco the capacity to process more than 10 million pounds of computers, electronics, batteries, solar panels, and alternative energy generation and storage equipment monthly. The team at Interco offers delivery, pickup, full truckload, and LTL services. Click here to learn more about Interco’s services.