How to Recycle Utility Meters: the Process

Interco works with utility provider companies, utility industry consultants, utility meter installers and utility meter manufactures to recycle utility meters. With the advent of automated SMART meter reading programs, utility companies are retiring thousands of old and obsolete utility meters every year.

Obsolete Utility Meters

How to Recycle Utility Meters: the Process

Utility companies will retire more old and obsolete meters in the next decade than in the past 25 years combined. The accumulation of obsolete electric, gas, and water meters continues to unnecessarily cost companies time and money. After swapping out old meters, the last thing any utility company wants to deal with is a pile of old, obsolete utility meters. Interco solves that problem as we recycle utility meters.

Interco makes recycling utilities meters fast and easy. We provide an all-in, picked-up, per pound price for analog and digital gas, electric, and water meters. Therefore, the process is simple and painless. We allow utility companies to focus on updating their systems, while we handle recycling the old obsolete meters in an environmentally friendly and efficient manner and recycle utility meters.

Do Not Resell Utility Meters

How to Recycle Utility Meters: the Process

Interco does not test, refurbish or resell utility meters. In fact, we recycle everything and provide a Certificate of Destruction (COD) as proof. We eliminate the potential liability of your meters ending up in landfills illegally. We separate the plastic or glass meter covers or faces from the meters to recycle utility meters. Interco has a wealth of experience recycling meters drastically reducing the material introduction in to landfills. As a result, we provide up to a 98% material recycling and recovery:

  • Separate glass and plastic from the meter
  • Detach stainless steel rings and collars
  • Refine all non-ferrous and ferrous metals
  • Disconnect circuit boards
  • Bale cardboard boxes

Packing Utility Meters

We prefer our partners pack the meters loose in palletized corrugated gaylord boxes. Interco found that this method is much more efficient than a roll-off or dump trailer and maximizes what we can pay by reducing the transportation cost. You can generally get 40-44 gaylords per 53’ van trailer load. If necessary, Interco can provide pallets and packing suppliers for the accumulation and shipment of meters

Consequently, the only thing we require is that you segregate the analog from the digital. This can be as simple as keeping the meters separate in split gaylords. If you need gaylords we can arrange to have them delivered to you a load or two at a time – depending on how many meters you anticipate.

How to Recycle Utility Meters: the Process

Once agreed, we will issue a Purchase Order (PO) and schedule pick-ups in 53’ Dry Van Trailers at your facility. We will then deliver the material to our facility in Madison, Illinois where we will weigh and record each pallet. In addition, we will reconcile the actual weight versus the PO estimate, and process payment to recycle utility meters.

All material will be recycled in accordance with approved ISO 14001 Environmental Management and ISO 45001 Occupational Health and Safety best practices. Interco confirms the exact weights and recorded upon receipt and we issue a written certificate of recycling.

No Hidden Costs

In conclusion, there are never any additional charges or costs at Interco to recycle utility meters. Our systems remove the meters from the waste stream and provide an immediate cash injection back in to the coffers of your utility company.

Recycle Automotive Parts

Interco Does Recycle Automotive Parts

Recycle Automotive Parts

Interco loves to recycle automotive parts such as Auto Radiators, Transmissions, Aluminum Auto Wheels and  Truck Wheels. In addition, the company recycles Chrome Wheels (Clean), Harness Wire, Alternators, and Aluminum-Nosed Starters,. They even handle Steel-Nosed Starters, AC Compressors, Wheel Weights, and Lead-Acid Auto Batteries. In addition, the company prefers to recycle parts as a specialty.

Recycling Car & Truck Parts

Recycle Automotive Parts
Aluminum Wheels-01

Interco does not recycle whole cars or trucks, however, to recycle automotive parts the parts need be specifically nonferrous. Therefore, the parts must not be in working order. In fact, Interco does not re-purpose or resell any parts. The team works to recycle automotive parts and reintroduce them in to the industrial cycle. Most noteworthy, most of the material ends up in smelters, refineries, mills and ingot makers.

The automotive parts do not end up in landfills.

The most common automotive parts:

Recycle Automotive Parts
  • Auto Radiators
  • Transmissions
  • Aluminum Auto Wheels
  • Truck Wheels
  • Chrome Wheels (Clean)
  • Harness Wire
  • Alternators

Recycle Automotive Parts

  1. Aluminum-Nosed Starters
  2. Steel-Nosed Starters
  3. AC Compressors
  4. Wheel Weights
  5. Lead-Acid Auto Batteries
Recycle Automotive Parts

Interco is located just across the Mississippi River from St. Louis, Missouri in Madison, Illinois. The facility comprises three buildings approximately 250,000 square feet on just over 25 acres to recycle auto parts. Interco stores material indoors and outside to recycle automotive parts. They bale nonferrous metal as well as cardboard and plastics. They store loose material in bales, in boxes, on pallets, in crates, in drums and in bins. All items are priced in part based on the industrial metals indexes.

Recycle Automotive Parts

The Interco management staff averages more than 15 years in the industry. Founded in 1996 as a computer and electronics recycler, Interco has grown in to one of the largest, most established commercial recycler in the Midwest. Therefore, Interco handles on average 22,000,000 pounds of material each month. That figure represents approximately 10,000 metric tons of material in one facility. Despite the immense size and large footprint, Interco is not open to the public.

In conclusion, more than 400 different materials and combinations fill the Interco warehouse. Interco will buy every imaginable nonferrous metal alloy no matter the origin. However, Interco does not deal with the dangerous or hazardous material.

Interco Recycles Transformers

Interco Recycles Transformers

Interco recycles Copper Transformers – large and small – as well as Aluminum.

Interco Recycles Transformers

Electricians tend to recycle the ones they remove from electric poles. As a result, they also find them in industrial applications, factories and utility facilities.

There are three main Transformers:

  1. Copper (large)
  2. Copper (small)
  3. Aluminum

Consequently, recyclers tend to deliver this material on pallets wrapped with stretch wrap, metal or plastic strapping, or tied down with ties. Sometimes companies deliver them loose in the back of box or dump trucks. Most often, transformers are delivered in steel bins or cardboard gaylord boxes on pallets.

No matter how folks deliver these items, Interco pays for the net weight of the material. However, it does not matter how they packed them — heavy containers are just as good as heavy bins — since Interco deducts the tare weight from the gross weight to determine the actual net weight.

Interco Recycles Transformers
How long has Interco recycled Transformers?
Interco Recycles Transformers

Interco has been in recycling computers, electronics, and nonferrous scrap material since 1996. In addition, Interco recycles baled cardboard, OCC, post-industrial plastics and polymers, and even some steel.

Interco is a member of the Institute of Scrap Recycling Industries, Inc. (ISRI). ISRI advocates on behalf of recyclers and scrap dealers worldwide. In dimes of dispute, ISRI acts as an expert arbiter.

It is not unusual for transformers to come in to the facility already dismantled. When that is the case, it is important that an Interco inspector go through each carton to ensure there are no contaminants. Contaminants can contain paper, plastic, solvents, dirt, and other forms of debris. Contaminants not only make it more difficult to add the metal back in to other industrial processes, but they can add significant weight to the packages. If there exist contaminants, the weight will be off. Therefore, the cost of the material is artificially inflated.

Importance of Recycling Sealed Units

Recycling Sealed Units

Recycling sealed units represent one of the most common sectors of recycling today. What are sealed units? They are compressors and gas chambers mainly found in the following:

Importance of Recycling Sealed Units
  • Refrigerators
  • Air conditioners
  • Freezers

The compressors pressurize the gas creating a strong condensation. They have a mechanical shelf life of a few hundred hours after which they become inefficient and turn out to be a large heavy waste item. Consequently, these items find themselves on the way to the scrapyards to be recycled.

These units occupy some of the largest real estates in scrap yards. Properly managed, they avoid becoming a menace through landfills and land pollution. Recyclers purchase scrap compressors and strip them down to their component. Then they recycle and recondition the components and use them in making new units.

So why is recycling sealed units important today?

Why is Recycling Sealed Units Important?

Importance of Recycling Sealed Units

When these compressors wear out or damaged, they turn into solid waste items. If not carefully managed, they could cause issues of contamination to landfills. In addition, all of the compressor components are recyclable; so why not recycle them and reduce solid waste?

If the inner gas leaks, the could prove extremely dangerous to nearby wildlife, agricultural and residential lands. Furthermore, indiscriminate dumping of these units could cause the inner oil to leak into water sources or on soil and could pollute both the soil and water.

Natural Resources Matter

Importance of Recycling Sealed Units

Recycling sealed units helps protect natural resources and reduce pollution (air and land). Sometimes, these sealed units may have punctures in them which allows the remaining gases to leak into the environment. The gases could be toxic (i.e. ammonia) and lead to pollution.

Also, these sealed units are metallic with motors and copper windings constituting the core. While scrap dealers classify inner motors as low-grade scrap, the copper wire represent some of the most valuable and available industrial metal scraps.

Recyclers who properly dispose of these gases in a safe way do more than save natural resources. They could save the environment as well. Recyclers often reduce pollution while saving valuable resources. This is often referred to as Urban Mining.

Furthermore, recyclers add to the economy by adding to their economic contribution. The sealed units help make planet earth greener and safer.

What Happens When Recycling Sealed Units?

Not much occurs when recycling sealed units. The process is pretty straightforward but requires meticulousness and dexterity. That is why it is best to leave the process to professional recyclers.

Importance of Recycling Sealed Units
  1. Recyclers buy scrap compressors and other forms of sealed units from scrap yards and take them to the recycling plant.
  2. The recycling company then safely displaces or filter out any gas left in the units. This helps curb pollution.
  3. Strip the sealed units to its individual components i.e. motors, copper wiring, screws, rings, bearings etc.
  4. After separating components, take valuable parts like rings and bearing back to the assembling factory if they are still in good shape. If they are not, recycle them.
  5. Recyclers separate the metallic parts of the units according to their types i.e. copper, steel, etc.
  6. The recyclers then melt the metals in furnaces of high temperature and cast the molten metals into new units.
  7. After cooling, test the refurbished unit for leaks and noise to assure consumer’s quality and reduce future cases of pollution.

Conclusion

Note, don’t try to recycle any compressors by yourself. You can take your scrap sealed units to your local junkyard. They will send them to Interco as this is their area of expertise: recycling sealed units. Contact them here.

Electric Motors: The Recycling Process

Electric motors convert electrical energy into mechanical energy. Recycling electric motors is imperative because of their wide industrial and commercial use.

Electric Motors: The Recycling Process

Examples of devices we use that makes use of an electric motor include:

  • Industrial fans
  • Blowers
  • Pumps
  • Disk drives
  • Machine tools, etc.

Electric motors generate mechanical energy (force) through the interaction of its windings and its magnetic field.

 

What are the Components of an Electric Motor?

Electric Motors: The Recycling Process

An electric motor contains a number of components embedded in it. These components are responsible for its converting ability, namely:

  • The shaft
  • Copper windings
  • Bearings
  • Armature
  • Stator
  • Commutator
  • Terminals
  • Case

These mentioned components all make it possible for the electric motor to successfully convert electrical energy into mechanical energy.

Why Recycling Electric Motor is Important

What happens when your fan stops working? Maybe it got spoiled by an electric surge that damaged all its components – the electric motor inclusive. Do you dispose of it?

Recyclers buy these damaged fans, pumps, blowers, etc. as scraps and take them to recycling centers for recycling. In addition, they separate the recyclable parts and set them apart for processing. Also, the electric motor is 100% recyclable since a majority of its components are metallic.

Furthermore, most industries use electric motors to produce the majority of today’s devices. Therefore, when they are damaged and do not undergo recycling they could cause landfill. Therefore, recycling electric motors help reduce landfill, solid waste and pollution in general. Also, recycling electric motors help protect natural resources i.e. copper.  One of the main components of the electric motor contains copper windings.

Copper is very valuable, expensive and used in many electrical devices. Rather than continuously depleting its source, why not recycle? However, recycling motors open job opportunities for interested parties. If you ever dream of being a recycler, you learn more from Interco.

How to Scrap Electric Motors for Recycling

Electric Motors: The Recycling Process

Recycling electric motors is mostly done on a large scale. As a result, some electric motors don’t have enough copper windings.

The process of recycling electric motors should be direct and straightforward:

  1. First, the recyclers collect many electric motors as possible to increase the possibility of getting enough copper.
  2. A hammer or hammering mill breaks the metallic casing of the motor.
  3. Then they separate the components and group them according to their materials.
  4. Finally, they take the separated components to their different recycling points and recycle them.

If you cannot do this on your own, you can sell your damaged devices that use electric motors as scraps to professional recyclers and make money.

Electric motors are very common items to recycle. Virtually every electric item with a mechanical movement in a home utilizes an electric motor. Many contain either an AC (alternating current) or DC (direct current) electric motor. Look for common motors that are recyclable in household items, industrial applications and automobiles. Interco recycles them all.

Common household items with electric motors include:

Electric Motors: The Recycling Process
  • Microwaves
  • Hand Tools
  • Air Conditioners
  • Power Supplies
  • Starters
  • Washing Machines
  • Computers

Common industrial items include:

  • Transformers
  • Pumps
  • Machinery
  • Manufacturing Equipment

Common automotive items include:

  • Starters
  • Alternators
  • Generators

What’s inside?

Most motors contain valuable copper and aluminum components. However, the exterior of most motors comprised of steel with a strong shell which protects the more fragile wiring and parts within. Additionally, some motors contain aluminum instead of copper. Most noteworthy. like copper, aluminum conducts of electricity and works well in some applications.

The more copper the more valuable an electric motor is to a recycler. Second most valuable common nonferrous metal found in electric motors is Aluminum. Consequently, steel can be recycled, but steel does not share the value of copper or aluminum. Because the presence of wood and plastic on electric motors is considered a contaminate, those motors contain lower value.

Interco recycles millions of pounds of  motors each year. As a result, recyclers categorize motors in to three main categories of size:

  1. Small motors generally fit about the size of a basketball and not much larger than an apple. Smaller electric motors — usually small electronics transformers in radio controlled cars, for instance — exist are less desirable due to their relative low copper or aluminum content.
  2. As a result, recyclers classify motors larger than a basketball, but less than 2,000 pounds as large motors.
  3. They consider motors weighing more than 2,000 pounds over-sized motors. These motors vary in demand due to their size and nonferrous metallic content.

Conclusion

If your company has a scrapyard full of electric motors, sell them to Interco so they can be properly recycled. Contact Interco here.

Electronics and Precious Metal Recycling

Electronics and Precious Metal Recycling

Since 1996, Interco has been a Electronics and Precious Metal Recycling leader. Most noteworthy, the company provides customized recycling services to dealers, brokers, and dismantlers. Furthermore, it services government organizations, schools, industrial generators and OEMs.

For outright sales or refining of precious metal bearing circuit boards, metallic or residues, Interco accommodates a broad client base. As large volume buyers of precious metal bearing circuit boards, Interco has established long term relationships with smelters across the globe. As a result, this competitive advantage affords the firm the ability to guarantee the clients’ downstream accountability.

Interco was the second company in the world to receive R2v3 certification. The R2 standard promotes responsible recycling. As a result, the business regularly audit our downstream vendors all the way to the end consumers, using the R2v3 standard. As a result, this assures that our suppliers of the compliance and integrity of our downstream vendors.

Electronics and Precious Metal Recycling Volume and Velocity

Of the 22-million pounds of Electronics and Precious Metal Recycling material Interco processes each month, the majority consists of nonferrous industrial metals. However, Interco recycles more than a thousand metric tons of computers, electronics, and telecommunications equipment each month as well.

Items With Precious Metal

Electronics and Precious Metal Recycling
  1. Hard Drive Boards
  2. Motherboards
  3. Power Boards
  4. Server Motherboards
  5. Telecom Boards
  6. HG Boards

Interco buys material to be recycled from the four corners of North and Central America as well as islands in the Caribbean. The increasing transportation costs often pose a challenge when trying to recycle material great distances away. In spite of this, the organization continues to grow and prosper.

 

Different Packages of Precious Metal Recycling

Electronics and Precious Metal Recycling

Interco builds specific Electronics and Precious Metal Recycling packages to be delivered to industrial consumers. Furthermore, these end-users include such as mills, ingot makers, smelters, and refineries in the continental United States and overseas. The staff repackages some of the material in its existing form, while they disassemble some material and de-mill others. Consequently, machines shred other material in to smaller pieces depending on the requirements of the end users. No matter what, they process each item using the safest strategic techniques in the industry.

Material is packaged in a variety of methods and containers:

  • Bales
  • Stretch-Wrapped Pallets
  • Cardboard Gaylord Boxes
  • IBC Totes
  • Metal Bins
  • Wooden Crates
  • 55-Gallon Drums
  • 5-Gallon Buckets

Recycling White Metals: The Process

Recycling White Metals

Recycling White Metals: The Process

Recycling white metals is one of the most practiced types of recycling. White metals are white or silvery alloys, especially tin-based alloys usually used for the surfaces of bearings. These alloys may contain tin, cadmium, zinc, lead, and bismuth. They are Babbitt metals with low melting points.

Manufacturers use white metals for producing:

White metals are common choices for the production of modern jewelry i.e. rings. They have high market value over gold or rosy metals. This is because silvery-white metals compliment skin tone and are timeless, unlike the gold alloys. Examples of white metals are: tin, silver, white, gold, nickel, lead, and iron.

Recycling White Metals: The Process

White metals are powerful conductors of heat and electricity and they are also known to be powerful amplifiers. This now explains why silver is the best conductor. White metals are also non-ferrous metals—They don’t have magnetic features. Their alloys are soft, ductile but tough. They also have a high coefficient of friction.

Recycling of White Metals

Recycling White Metals: The Process

Recycling white metals is usually performed by professional recyclers. These recyclers buy white metal scraps from scrap yards, processes and recycle them. Recyclers recycle white metals in a similar way that metals are generally recycled. They subject the metals to immense heat temperature that is above their melting point and they are cast into molds. Recycling white metals is essential so that they process the scraps into new metals of better quality. The most common use of white metals is in the manufacture of bearings.

Examples of the items that use bearings are: gearboxes, air planes, turbines, pumps, compressors, fans, etc.

Recycling White Metals: The Process

Prior to this list, the need for recycling white metals is essential so that manufacturers can manufacture these devices. Also, recycling these worn out or outdated devices help protect the natural source of white metals from being total depletion.

How to Recycle White Metals

Recycling White Metals: The Process

Recycling white metals is straightforward without much complexity. Recyclers like Interco specialize in recycling white metals and its scraps for further use and processing.

The following steps involved in recycling white metals are:

  1. The recyclers collect or buy the scraps of white metals from scrap yards or deposits.
  2. A metal shredder shreds the white metals into smaller pieces.
  3. Then, they transport these shreds into a furnace. However, white metal alloys don’t have high melting points. The temperature should be set a little above their melting points i.e. 350◦C. This is to ensure uniformity in the molten state.
  4. They mix a few additives i.e. chemicals to improve its quality.
  5. Next, recyclers cast the molten white metal into mold or ingots and leave to cool.
  6. They will transport these casts to manufacturing or industrial companies for further processing.

 

Conclusion

The application of white metals today may not be outspoken, but it is indeed important for the possibility of many inventions. Furthermore, recycling white metals properly helps reduce pollution by preventing it from ending up in a landfill. Also, recycling white metals helps provide job opportunities for prospective recyclers.

Recycling Scrap Red Metals, Metallics, Residues, and Drosses

Recycling Scrap Red Metals, Metallics, Residues, and Drosses

Recycling Scrap Red Metals, Metallics, Residues, and Drosses

Recycling Scrap Red Metals makes for a great conversation. Scrap metals are very much recyclable. Because of how recyclable they are, it makes them valuable when Recycling Red Metals, Metallics, Residues, and Drosses.

Recycling scrap copper or brass is basically the systematic collection of red metals, residues and drosses that exist at the end of their useful life. When Recycling these industrial Red Metals, recyclers sort the nonferrous scrap by quality and copper content. In addition, they are alloys and are termed red metals because of their similar reddish color characteristic and copper content.

Why are They Valuable?

Recycling this sort of metal can be done repeatedly without any alteration of their intrinsic properties. Especially relevant examples of these scrap red metal, metallics, residues and drosses and why they are valuable:

  • Copper: This industrial metal resists corrosion and demonstrates highly malleable characteristics such as being durable and having high thermal and electrical properties. Cable and electronic equipment manufacturers use computer materials. These properties make their scraps valuable.
  • Bronze: This red metal is an alloy of copper and other metallic materials. aluminum. It possesses similar properties with copper. Its scraps refined and used to make medals, musical instruments and other hardware materials.
  • Brass: The combination of copper and zinc make up this red metal alloy. The amount of zinc present depends on the value of its scrap because more zinc content means less ductility which decreases its value to the electronic industries despite its elevated intrinsic value.

The Process of Recycling Scrap Red Metals

Recycling Scrap Red Metals, Metallics, Residues, and Drosses

Four main steps comprise the process of recycling scrap red metals. Recycling scrap red metals involve four main steps:

  1. Collection: First of all, collectors gather the various red metal scraps. Certain manufacturing companies buy these scraps. They buy it from people who sell their worn out equipment, parts, or instruments. These items often contain red metal. This process of buying is the collection process. Accordingly, one of the largest source of red metals represent materials made of copper i.e. connecting wires.
  2. Sorting: The process of recycling scraps red metals takes off after collection. Consequently, the recycling facilities sort the collected scraps. They sort primarily according to their quality (intrinsic values). Recyclers separate the pure copper from its alloys (i.e. brass, bronze etc.). Processors then use magnets and optical color differentiation sensors and discern the red metal type. After this, they often deliver the material to a metal shredder to prepare it for the next step.
  3. Melting and Purification: Furthermore, another step is deployed after this material has been successfully collected and sorted. They then subject it to to high temperatures so they can melt and purify the metal and extract the copper. The purification ensures the metal is free of contaminants. This process ensures the metal becomes high-quality.
  4. Solidifying: Finally, after the scraps have been melted and purified, factories cast them into shapes in its molten state depending on their purpose and leave them to dry.

Conclusion

In conclusion, the need for recycling scrap red metal is imperative as it is more economical for the manufacturing industries than buying raw materials as well as helping the environment. Interco has been Recycling Scrap Red Metal, Metallics, Residues, and Drosses since 1996.

Recycling Copper Iron Materials

Recycling Copper Iron Materials

Interco takes recycling copper iron materials very seriously. These materials are found virtually everywhere. As a matter of fact, these materials (iron and copper) are one of the most recycled materials today. According to the Institute of Scrap Recycling Industries (ISRI), The U.S. alone recycles approximately 150 million metric tons of copper iron scraps annually. This statistic explains how imperative recycling scrap copper iron materials is to the manufacturing/production industries.

The Scrap Metals

  1. Copper Scraps: This is one of the most valuable metals scraps when it comes to recycling because of its infinite recycling life and high thermal and electrical properties.
  2. Iron Scraps: It is a ferrous metal (it possesses magnetic properties). It is also a major scrap used in the manufacture of cars, kitchen utensils, etc.

The scraps of copper and iron materials contain recyclable materials which are remains from different manufacturing and consumption industries. Example of such scraps are:

Recycling Copper Iron Materials
  • Vehicles parts
  • Building supplies
  • Electronic wiring
  • House hold plumbing
  • Kitchen sinks and utensils
  • Iron railings
  • Sealed Units & Compressors
  • Iron Pans
  • Lawn Mowers etc.

These pieces are present everywhere and even in our households, from our worn-out kitchen utensils to our out of date or damaged electronic household appliances. Recycling copper iron materials is one of the ways certain manufacturing industries produce new products; Rather than buying raw iron or copper resources, they buy these metallic scraps which are obviously way cheaper, and refine them for production use.

Recycling Copper Iron Materials

Why Is the Recycling Copper Iron Materials Important?

As earlier stated, recycling copper iron materials help provide secondary raw materials for the production industry. This alone helps reduces the use of organic resources as well as energy.

Furthermore, mining operations induce seismic activities as miners drill deep into the ground in search of metallic ores and could make certain holes within the earth’s crust causing the plates to be unstable which could cause tremors and earthquakes as well as other casualties.

Recycling reduces the need for excessive mining operations as industries could make use of metallic scraps to produce new materials with just a little cost for the refining process.

Also, good land which could be used for agriculture and other green activities would not be decimated by mining processes. That is, recycling in general and not only of metallic scraps actually makes the earth greener.

What’s the Need

Recycling Copper Iron Materials
Recycling Copper Iron Materials

The need for recycling in the world today cannot be overemphasized as it offers many benefits to the environment.

Recycling scraps actually do help these companies save a lot and moreover, you who owns the scraps could make money off them by selling them to these manufacturing companies.

Like aluminum and iron, recycling of scrap copper iron materials can be traced back to early civilization. Copper and its materials do not easily degrade during recycling. This made the recycling of scrap highly prized by scrap metal collectors and businesses. In addition, thanks to copper and its small electrical resistance properties, currents flow easily through copper materials without much loss of energy. Accordingly, the size rather than weight marks the levels of importance, copper iron materials proves the best choice.

Recycling of scrap copper iron materials involves the recovery, smelting, and processing of scrap metal materials (i.e. Copper) from abandoned parts or structures, so that recyclers use it as a raw material in the production of new and finished goods.

Economic Importance Recycling Copper Iron Materials

Recycling Copper Iron Materials

Experts stress the economic importance of recycling scrap to a country’s economy cannot be over-emphasized. Through the recycling of scrap copper iron materials:

  1. Recyclers make raw materials readily made available for the scrap metal recycling industry for the production of optimum goods
  2. Copper materials work for domestic use and export to other countries
  3. Exports boost a country’s economy through recycling of scrap used as foreign exchange for industries, thereby making it one of the ways of measuring economic growth
  4. There has been a rapid decline in the Unemployment rate

The Uses of Copper Iron Materials

Recycling copper iron materials proves to be vital to our country and future progress. Through recycling copper iron materials, there has been:

  • The rapid growth of renewable sources of energy
  • Enhancement in medical devices and application
  • Improved building material that can qualify a building for LEED credits and help lower its carbon footprint
Recycling Copper Iron Materials

The Results are Obvious

In conclusion, when speaking of scrap metal recycling, the recycling of copper iron materials became safer and more sustainable due to technological advancement in recent times. Today, over 20 active copper mines operate in the United States presently and these industries have played a vital role in supporting both environmental and economic growth. Recycled materials provide diverse ways in many aspects of our daily life.

Copper on its own provides an excellent electrical conductor and so fits in electrical wiring and electronics generally. Moreover, it acts as highly resistant to the damages of water and other elements. These and other factors position copper iron materials as useful items in construction and medical science. Some said that the amount of copper a nation uses marks a good indicator of how technologically advanced the nation is and would want to be. So, with the present growing demand for the recycling of copper iron materials, there is a need to open improved mines and provide necessary minerals for our future development.

Interco Certifications

Interco has achieved certifications from the International Organization for Standardization (ISO). in addition, Interco is certified Occupational Health and Safety Assessment Series (ISO 45001) and by Sustainable Electronics Recycling International (SERI) organization. The Interco Certifications are very important.

Interco has achieved the ISO 9001 Quality Management Systems certification. This standard specifies requirements for a company’s quality management system (QMS). By implementing and following the highest standards, Interco operates in a more efficient and effective manner. This helps Interco maintain and increase customer satisfaction by reducing waste. It also helps Interco increase and then maintain productivity throughout the organization. Interco Certifications are very important.

Interco Certifications: ISO 9001 Quality Management Systems

Interco has achieved the ISO 9001 Quality Management Systems certification. This standard specifies requirements for a company’s quality management.

As an ISO 9001 certified company, Interco maintains an internationally accepted uniform quality system. This system is universally accepted as best practice. Moreover, the ISO 9001 practices help Interco provide the highest levels of customer service. It also ensures the products Interco handles and provides its material in the best manner possible.

Interco Certifications: ISO 14001 Environmental Management System

Interco Certifications

In addition to maintaining the ISO 9001 Quality Management Systems standards, Interco achieved ISO 14001. This certification maintains the standards of care reflected in the ISO 14001 Environmental Management System certification. The implementation of the ISO 14001 standards helps Interco manage the highest standards and guidelines of environmental regulation and process. By maintaining the highest standards of environmental awareness and care, Interco is able to reduce its environmental impact.

As a recycling company, it is important that Interco constantly seek to improve in this manner. Accordingly, this standard of certification helps Interco demonstrate the highest levels of environmental quality and conformity. Interco does this through strict adherence to environmental performance and continuous improvement.

Interco Certifications: ISO 45001 Occupational Health and Safety Assessment Series Management System

Interco Certifications

Moreover, in maintaining the highest standards of health and safety, Interco has adopted and maintained the ISO 45001 standards. The ISO 45001 Occupational Health and Safety Assessment Series Management System standards of certification are very important. They help Interco identify and control potential health and safety risks throughout the company and the tangential supply chain within which Interco is a critical cog.

In addition, its implementation helps Interco reduce the potential for accidents and danger while improving the overall health, safety, and performance levels across the company. The ISO 45001 standard is internationally accepted as the highest standard of health and safety management in existence.

Interco Certifications: R2V3 Responsible Recycling Standard

Interco Certifications

It is also important to note that Interco was only the second electronics recycling company in the world to achieve the R2:2013 standard and currently holds the R2v3 Responsible Recycling Standard Certification. The R2v3 Standard Certification focuses on the environmental impact of electronics recycling. Its subsequent affects benefit the health and welfare of both the environment and its inhabitants. Interco is R2v3 certified at its Edwardsville, Illinois facility where the company conducts its electronics recycling operations.

It is by far the highest standard of environmental social responsibility on the planet. Moreover, it combines a standard set of safety measures with best practices and documentation requirements to help Interco maintain the highest standards of environmental responsibility.

Interco is certified ISO 9001, ISO 14001, ISO 45001 and R2v3 at its Edwardsville, Illinois facility where the company conducts its electronics recycling operations as well.

Sustainable Redevelopment

The Interco Goal: Sustainable Redevelopment

Interco strives to promote Sustainable Redevelopment in every transaction. At Interco success begins with continual improvement and certification. As a certified ISO 9001, ISO 14001, ISO 45001 and R2v3 certified handler of recycled material, the company maintains sustainable redevelopment as a top priority.

Top Priority

Recycling materials according to this highest standards helps the environment. It allows the greatest amount of material to be re-purposed in other industries. This, ultimately, decreases costs and increases the amount of usable resources.  Therefore, Interco strives to save reusable material from entering the world’s landfills and provide a comprehensive platform to do so.

Interco became only the second company in the world to be certified to the R2v3 standard. Accordingly, they committed substantial resources to lead the charge. Subsequently, recycling in this manner provides results ensuring that recyclers handle focus materials in the most appropriate way possible. The R2v3 focus materials items containing PCBs (polychlorinated biphenyls), mercury, CRT (cathode ray tube) glass, batteries and whole or shredded circuit boards prove the most difficult to process.

Quality, Environmental, Health and Safety Policy

Sustainable Redevelopment

The Interco core business delivers innovative solutions. As a result, the team offers competitive pricing and quality recycling services throughout the supply chain. Emphasizing a primary focus creating and executing efficient solutions for both suppliers and customers positions Interco at the top of the field. Protecting the environment and worker health and safety assures everyone involved that proper measures take priority of all else. The Interco management team focuses on the conscious responsibility to be safe.

Most of all, they create, maintain and encourage a safe and clean environment throughout the facility and campus. Furthermore, the safety team works to reduce health and safety hazards through the proper application of safe work practices for sustainable development. Finally, Interco maintains a stringent Environmental, Health, and Safety Policy.

The Interco Commitment                                                     

Sustainable Redevelopment
  • Continual improvement and meeting customer requirements
  • Prevention of industrial risk rather than detection/rectification and its adverse impact on the environment
  • The prevention of pollution and the prevention of injury and ill health
  • Managing used and end of life electronic equipment based on a reuse, refurbishment, recovery, disposal hierarchy including onsite and downstream materials management throughout the recycling chain
  • Managing Focus Materials throughout the recycling chain to final disposition with due diligence to protect our environment
  • Follow safe work practices and continually improve the effectiveness of system

Interco Cares

Sustainable Redevelopment
  1. Creating an environment of teamwork as well as increase the system awareness to all employees
  2. Comply with relevant compliance obligations, including laws, regulations, and other requirements, as well as take any additional measures considered necessary
  3. Communicating and reinforcing this policy throughout our company, to all persons working for or on behalf of our company, as well as, to our customers, our suppliers, and other interested parties
  4. Management regularly reviews the quality, environmental health and safety management system performance and compliance to ensure adherence to establish goals and policies

Conclusion

In conclusion, Interco cares about the environment and sustainable redevelopment. Consequently, the company strives to do everything in its power to minimize negative effects on the environment. Contact Interco today do your part to recycle and help keep Mother Earth safe.

Domestic International Logistics Services

Domestic International Logistics 

Services

Domestic International Logistics Services

Interco partners with on-site Madison Cartage to provide seamless domestic international logistics services for our suppliers and customers. Most of all, the Madison Interco staffs have more than 75 years combined in domestic freight management and brokering specializing in recycled material. In addition, Madison owns and operates its own fleet of trucks providing seamless and cost-effective intermodal drayage services to all rail ramps in the St. Louis metropolitan area.

Domestic International Logistics Services

The Interco staff, through coordination with Madison, ensures coordinated loads. As a result, they schedule and pick up the loads on time. The importance of packing lists and scale tickets in the recycling and scrap metals and electronics industry cannot be overstated. The Interco staff will coordinate loads to be documented, picked up, and weighed. In addition, they ensure the loads travel safely. Furthermore, they deliver all loads with all the requisite industry and DOT forms and paperwork. Most noteworthy, they complete, document, and present the forms in a professional and timely manner.

Interco also handles all inbound and outbound ocean freight container shipments for its customers and suppliers. Finally, the Madison Interco staff will book and execute the container shipments with the ocean freighters and railroads. Hence, the staff will advise if on-site inspections or pre-loading photos are required and coordinate accordingly with the Interco facility staff, supplier, or customer.

Photo Documentation

The Interco staff will ensure all standard loading photos are professionally documented, communicated, and stored for every shipment:

Domestic International Logistics Services
  1. An empty container with inside container number visible
  2. One-quarter-loaded
  3. Half-loaded
  4. Three-quarters- loaded
  5. Fully loaded with doors open
  6. 100% loaded with the right door closed
  7. Totally loaded with both doors closed and seal on the door
  8. Close-up of the door seal

In conclusion, if additional loading photographs or other services are required (e.g. inspector with Geiger counter), the Interco staff will facilitate the additional services and manage the process through completion. Rather, immediately upon completion of loading, Interco staff members document and record all loading photos, scale tickets, container weight verification forms, and packing lists on a per-container basis to ensure accuracy and timeliness.

The Interco domestic & international logistics services include:

  • Intermodal Drayage Services
  • Domestic FTL Trucking
  • Full Container Loads (FCL) Import/Export Service
  • International FCL Transportation
  • Ocean Freight
  • Worldwide Air Freight Import/Export Service
  • Domestic Air Freight
  • Export Documentation
  • Freight Distribution

Important Domestic International Logistics Services

Domestic International Logistics Services

In addition to the above, the firm offers other services. As a result, the offerings make up a large part of the daily tasks at Interco. The most important tasks listed below:

  1. Bulk Container Loading & unloading
  2. IATA Compliance
  3. ISF Compliance
  4. Less Than Container Loads (LCL) Import/Export Service
  5. Letter of Credit Coordination
  6. Marine Insurance Documentation
  7. NVOCC Compliance
  8. TSA Communication & Certification
  9. Warehousing and Storage
  10. Domestic LTL Trucking
  11. Door-To-Door Service
  12. Electronic SED Filing
  13. C-TPAT Compliance

Conclusion

In conclusion, domestic international logistics services play a large role. No company can transport material without these services. As a result, domestic international logistics services grows in importance every day. The staff at Interco manage this thoroughly.