Who is the Best Company to Recycle Scrap Copper Transformers?

Companies have continually utilized transformers for years. Since transformers have a life expectancy of 30 to 50 years, company rarely have to think about what to do when one goes bad. When transformers do stop working, it may be a challenging task to figure out what to do with the old one. Companies may even google, “who is the best company to recycle scrap transformers?”

In fact, a good place to start your research may be the ISRI website. The Institute of Scrap Recycling, Inc. is the voice of the recycling industry promoting safe, economically sustainable, and environmentally responsible recycling. They do this through networking, advocacy, and education. Moreover, they offer a searchable directory to help companies find the best recycling center closest to them.

When Do You Replace Transformers?

Before you research the best company to recycle scrap transformers, you need to determine if you even need a new transformer. In fact, there are a few ways to check to see if a transformer has gone bad:

• Perform a visual inspection. Common things you will see if a transformer has gone bad is bulges or burn marks. If you see this, then you do not need to test it, it needs to be replaced!
• Check the schematic circuit. When you look at a schematic, you can see how all the parts of the circuit are connected. You can check to make sure everything is connected.
• Find the input and output. You can easily tell if a transformer has gone bad if the output is not the same as the input.
• Check the voltage. You can check the voltage by checking the top center tap. If there is power going to the unit, check for a bad connection from the power connection block to the unit itself.
• Inspect the meter. If your meter does not show any voltage, then the problem likely lies with the unit itself and will need to be replaced.
• Evaluate the power. A bad transformer will have weak or no power. A simple way to check the power is to turn the unit off and on again.
• No voltage. If there is no power, there may be no voltage at all. You can quickly determine if voltage is the issue, by checking the voltage points. If there is no voltage or weak voltage, the problem may have some root causes. One could be the control board.

What Determines the Best Company to Recycle Scrap Transformers?

The best company to recycle scrap transformers will be a certified recycling center. Companies should work with a certified recycling center, like Interco, to guarantee proper recycling practices are in place. This will guarantee that the material will not end up in landfills, but rather will be reused. Certified recycling centers also have a number of benefits:

1. Manufacturers and companies know exactly where their material is going. (Detailed documentation)
2. Employ the best management practices are in place
3. Evolving standards to continually improve the recycling process.
4. Annual audits

In fact, all these points make the recycling buying and selling process as easy as possible. Therefore, a company should work with a certified recycling center, like Interco.

About Interco

Interco is a global recycling company providing metals, computers and electronics recycling services to industrial, dealer, and government organizations throughout the western hemisphere. The facility has a 145,000 sqft. processing plant committed to the processing of computers, electronics, and batteries with the remainder of the indoor facility used for the processing of nonferrous industrial metals.

The facility has five buildings — approximately 400,000 square feet total — on more than 35 acres. The company facility has more than 20 inbound and outbound docks for receiving and shipping nonferrous scrap material as well as a railroad rail spur to load rail cars.

Interco, as an ISO 9001 Quality Management System certified company, continues an international-accepted uniform quality system, supplies the highest levels of customer service, and manages its material in the highest regard.

As an ISO 45001 Occupational Health & Safety Assessment Series Management System certified company, the company identifies and controls potential health and safety risks throughout the company and the tangential supply chain. The ISO 45001 standard is internationally recognized as the highest standard of health and safety management in existence.

Interco is the Best Company to Recycle Scrap Copper Transformers

Overall, companies will eventually need to get rid of their old transformers. In fact, the most ideal option is to recycle them with the best company to recycle scrap transformers, Interco. Interco will work with you to satisfy any of your scrap nonferrous metals and eScrap recycling needs. To learn more, click here.

What Should Companies Do with Scrap Copper Transformers?

Even though companies do not need to replace their transformers that often, there will come a time when companies will need to dispose of their scrap transformers. Transformers last between 30 to 50 years, so companies will not need to worry about this too often, but when they do it is smart to have a plan.

A transformer is an electrical device consisting of two or more coils of wire used to transfer electrical energy by means of a changing magnetic field. It may seem challenging to find a way to dispose of scrap transformers, but the process is quite easy with Interco. In fact, the company recycles copper and aluminum transformers.

How do you tell if Scrap Transformers have stopped working?

 First, you will need to determine if your company needs to replace the transformer. There are a few ways to check to see if a transformer has gone bad:

• Perform a visual inspection. Common things you will see if a transformer has gone bad is bulges or burn marks. If you see this, then you do not need to test it, it needs to be replaced!
• Check the schematic circuit. When you look at a schematic, you can see how all the parts of the circuit are connected. You can check to make sure everything is connected.
• Find the input and output. You can easily tell if a transformer has gone bad if the output is not the same as the input.
• Check the voltage. You can check the voltage by checking the top center tap. If there is power going to the unit, check for a bad connection from the power connection block to the unit itself.
• Inspect the meter. If your meter does not show any voltage, then the problem likely lies with the unit itself and will need to be replaced.
• Evaluate the power. A bad transformer will have weak or no power. A simple way to check the power is to turn the unit off and on again.
• No voltage. If there is no power, there may be no voltage at all. You can quickly determine if voltage is the issue, by checking the voltage points. If there is no voltage or weak voltage, the problem may have some root causes. One could be the control board.

It is important to recycle transformers because they pose a significant threat to the environment and the people living in the surrounding area if they end up in landfills. They could possibly leak in landfills and affect the drinking water, which would cause more problems.

Why are Scrap Transformers considered toxic?

Transformers are considered toxic because they contain the chemical polychlorinated biphenyls. In fact, this is a manmade chemical that manufacturers use to protect the coils inside transformers from overheating.

If this chemical leaks into a landfill, then it would negatively affect the environment and the people living in the surrounding area.  In fact, this chemical is known to cause extreme health problems in humans. For example:

1. Melanomas
2. Liver cancer
3. Gall bladder cancer
4. Biliary tract cancer
5. Gastrointestinal tract cancer
6. Brain cancer
7. Breast cancer

Companies that choose to recycle their scrap transformers, are doing their part to help reduce landfills, overall pollution, and the use of raw materials. Working with a recycling center, like Interco, makes recycling scrap transformers easy.

About Interco

Interco is a global recycling company providing metals, computers and electronics recycling services to industrial, dealer, and government organizations throughout the western hemisphere. The facility has a 145,000 sqft. processing plant committed to the processing of computers, electronics, and batteries with the remainder of the indoor facility used for the processing of nonferrous industrial metals.

The facility has five buildings — approximately 400,000 square feet total — on more than 35 acres. In fact, the company facility has more than 20 inbound and outbound docks for receiving and shipping nonferrous scrap material as well as a railroad rail spur to load rail cars.

Moreover, the company is within proximity to four major interstates (I-44, I-55, I-64, and I-70) while centrally located just across the Mississippi River from St. Louis, Missouri in Madison, Illinois. The company offers a convenient delivery location as the facility is near four major interstates (I-44, I-55, I-64, and I-70) that intersect all of the Midwest and Central USA.

Companies Should Recycle Scrap Copper Transformers with Interco

Overall, companies will eventually need to replace their old transformers. In fact, the best option for companies is to recycle them. Working with a recycling center, like Interco, makes this process extremely easy. With a staff of 100 employees, the company receives, processes, upgrades, repackages and ships approximately 15,000 tons of material monthly. To learn more, click here.

How Should A Company go about Recycling Copper Transformers?

Since companies all have some sort of transformer, they will all need a lesson in recycling copper transformers. A transformer is an electrical device consisting of two or more coils of wire used to transfer electrical energy by means of a changing magnetic field.

Transformers, like anything else, have an expiration date, where they will no longer be able to work properly. A transformer’s life expectancy is between 30 to 50 years, so companies will not always have to worry about it. But when they do, it can seem like a challenging task.

Interco works with companies to recycle transformers. In fact, the company recycles copper and aluminum transformers.

How Do You Know If A Transformer Has Gone Bad?

There are a few ways to check to see if a transformer has gone bad:

• Perform a visual inspection. Common things you will see if a transformer has gone bad is bulges or burn marks. If you see this, then you do not need to test it, it needs to be replaced!
• Check the schematic circuit. When you look at a schematic, you can see how all the parts of the circuit are connected. You can check to make sure everything is connected.
• Find the input and output. You can easily tell if a transformer has gone bad if the output is not the same as the input.
• Check the voltage. You can check the voltage by checking the top center tap. If there is power going to the unit, check for a bad connection from the power connection block to the unit itself.
• Inspect the meter. If your meter does not show any voltage, then the problem likely lies with the unit itself and will need to be replaced.
• Evaluate the power. A bad transformer will have weak or no power. A simple way to check the power is to turn the unit off and on again.
• No voltage. If there is no power, there may be no voltage at all. You can quickly determine if voltage is the issue, by checking the voltage points. If there is no voltage or weak voltage, the problem may have some root causes. One could be the control board.

When you have determined the transformer has gone bad, then you will need to replace it. Then companies have to face the issue of what to do with the old transformer. Recycling copper transformers with a recycling center, like Interco, is the best option.

Why Is It Important to Recycle Transformers?

It is important to recycle transformers because they contain toxic materials. When a transformer is running, it generates heat. If the coils are not protected, then they will melt. This can become extremely toxic because the coil is commonly made of copper. So, manufacturers use polychlorinated biphenyls. This is a manmade chemical that is an oily liquid. This chemical is resistant to extreme temperature and pressure, which makes it the perfect chemical to protect the coils.

If this chemical were to leak in a landfill, it would negatively affect the environment and the people living in the surrounding area. It could potentially leak into our water supply and cause extreme health problems. That is why the best way for companies to get rid of their transformers is to recycle them.

Recycling Copper Transformers: The Process

The process to recycle transformers should be performed safely using the following steps:

1. First, they remove the transformer from the device.
2. After it arrives at a facility, they test the equipment and oils for PCBs.
3. Then they process the oil and clean it to reuse.
4. They then disassemble the transformer and decide whether the parts will be disposed of or reused.
5. Then, they chop the coils, so they will be easy to melt and recycle.
6. They then recycle the tank as a whole.

Since scrap transformers contain toxic materials, it is important that the process is done in a controlled environment. Companies should work with a certified recycling center, like Interco, so they know that the recycler is using the best recycling practices out there.

About Interco

Interco is a global recycling company providing metals, computers and electronics recycling services to industrial, dealer, and government organizations throughout the western hemisphere. The facility has a 145,000 sqft. processing plant committed to the processing of computers, electronics, and batteries with the remainder of the indoor facility used for the processing of nonferrous industrial metals.

The facility has five buildings — approximately 400,000 square feet total — on more than 35 acres. The company facility has more than 20 inbound and outbound docks for receiving and shipping nonferrous scrap material as well as a railroad rail spur to load rail cars.

The company is within proximity to four major interstates (I-44, I-55, I-64, and I-70) while centrally located just across the Mississippi River from St. Louis, Missouri in Madison, Illinois. The company offers a convenient delivery location as the facility is near four major interstates (I-44, I-55, I-64, and I-70) that intersect all of the Midwest and Central USA.

Conclusion

In conclusion, companies will eventually need to replace their old transformers. Recycling copper transformers is the best way to discard any old transformer. Working with a recycling center, like Interco, makes this process extremely easy. With a staff of 100 full time employees, the company receives, processes, upgrades, repackages and ships approximately 15,000 tons of material monthly. To learn more, click here.

How Should a Company Recycle Copper Transformers?

Transformers have been around since the 1880s, and companies have continually used them for years. Transformers have a normal life expectancy between 30 to 50 years. Depending on when transformers were installed, they may be reaching the end of their lives. Companies will need to find a way to get rid of their scrap transformers. In fact, the best way is to recycle copper transformers.

A transformer is an electrical device consisting of two or more coils of wire used to transfer electrical energy by means of a changing magnetic field.

Companies should work with a certified recycling center to recycle copper transformers. A good place to start your search may be the ISRI website. The ISRI is the voice of the recycling industry promoting safe, economically sustainable, and environmentally responsible recycling. They do this through networking, advocacy, and education. They offer a searchable directory to help find a recycler near you.

Interco has been a member since 1996.

Why Is It Important to Recycle Copper Transformers?

It is important to recycle copper transformers because they contain toxic materials. When a transformer is running, it generates heat. If the coils are not protected, then they will melt. This can become extremely toxic because the coil is commonly made of copper. So, manufacturers use polychlorinated biphenyls. This is a manmade chemical that is an oily liquid. This chemical is resistant to extreme temperature and pressure, which makes it the perfect chemical to protect the coils.

If this chemical were to leak in a landfill, it would negatively affect the environment and the people living in the surrounding area. It could potentially leak into our water supply and cause extreme health problems. That is why the best way for companies to get rid of their transformers is to recycle them.

The Process to Recycle Copper Transformers

First, you need to know the basic components of a transformer:

• Laminated core
• Windings
• Insulated materials
• Transformer oil (polychlorinated biphenyls)
• Tap charge
• Conservator
• Breather
• Cooling tubes
• Buchholz relay
• Explosion vent

The process to recycle copper transformers should be performed safely using the following steps:

1. First, they remove the transformer from the device.
2. After it arrives at a facility, they test the equipment and oils for PCBs.
3. Then they process the oil and clean it to reuse.
4. They then disassemble the transformer and decide whether the parts will be disposed of or reused.
5. Then, they chop the coils, so they will be easy to melt and recycle.
6. They then recycle the tank as a whole.

Since scrap transformers contain toxic materials, it is important that the process is done in a controlled environment. Companies should work with a certified recycling center, like Interco, so they know that the recycler is using the best recycling practices out there.

About Interco

Interco is a global recycling company providing metals, computers and electronics recycling services to industrial, dealer, and government organizations throughout the western hemisphere. The facility has a 145,000 sqft. processing plant committed to the processing of computers, electronics, and batteries with the remainder of the indoor facility used for the processing of nonferrous industrial metals.

The facility has five buildings — approximately 400,000 square feet total — on more than 35 acres. The company facility has more than 20 inbound and outbound docks for receiving and shipping nonferrous scrap material as well as a railroad rail spur to load rail cars.

The company is within proximity to four major interstates (I-44, I-55, I-64, and I-70) while centrally located just across the Mississippi River from St. Louis, Missouri in Madison, Illinois. The company offers a convenient delivery location as the facility is near four major interstates (I-44, I-55, I-64, and I-70) that intersect all of the Midwest and Central USA.

Established in 1996, Interco has grown to prominence as one of the most reputable recyclers of nonferrous scrap in the United States. The company is experiencing significant market position growth due to a number of factors that suggest steady acceleration for years to come.

Recycle Your Scrap Copper Transformers with Interco

Overall, companies will eventually need to get rid of their scrap transformers. In fact, the best option is to recycle copper transformers. In fact, recycling transformers with a recycling center, like Interco, will guarantee that the toxic materials inside will not leak in landfills. Interco purchases scrap anywhere in North America for recycling. The company continues to lead the way in terms of innovative industrial recycling solutions. The company offers delivery, pickup, full truckload, and LTL services. To learn more, click here.